![]() ![]() and for the second, as sudo, add the folloing two lines to /etc/nf. To fix the first: sudo ip route add 192.168.2.0/24 dev eth1 sudo ip route add default via 192.168.2.1. To Ethernet Gigabit LAN Network Adapter (ASIX AX88179 chipset. You should make sure that the routing table and the DNS are correctly configured. ax88179_178a 3-7:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-7, ASIX AX88179 USB 3. I suggest you to unplug the Ethernet cord from the laptop and restart the system. What I tried: check if my Firewall is off, it is deleted the file removing and re-adding the ethernet interface in the network pane. The cable is running straight to my modem/switch. usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 I see a wrong subnet mask and get an IP that is not within the network (169.254.44.151). usb 3-7: New USB device found, idVendor=0b95, idProduct=1790 usb 3-7: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7 usb 3-7: unable to get BOS descriptor or descriptor too short I bought a USB-LAN Adapter with the AX88179 chipset, it it recognized by Ubuntu 18.04, but not by the Nintendo Switch.ĭmesg tells: usb 3-7: new high-speed USB device number 5 using xhci_hcd But also the user described that it is possible that Nintendo can block certain models with that chipset. ![]() I am just curious whats going on and if its possible to get it work.Īs described in Why does the Nintendo Switch only work with USB-LAN Adapters with the AX88179 chipset? by user1686 the Nintendo Switch should work with any USB-LAN Adapter with the AX88179 chipset. I am not an expert, but I will give my best to provide necessary information. I don't know if this is the right community, if not please move it to the right.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |